GaugeControl1.58
Publisher Description
Change the look and feel of your device, customize warning levels and change the parameters displayed.
Version History Minor fixes :
MoTeC M800 oil pressure scaling
Water Pressure support for Link ECUs
Fuel level byte offset corrected for Link ECUs 1.58 Sep 5 Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
About GaugeControl
The company that develops GaugeControl is Kurt Wubbels. The latest version released by its developer is 1.58.
To install GaugeControl on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the GaugeControl as malware if the download link is broken.
How to install GaugeControl on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the GaugeControl is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After GaugeControl is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.58
posted on 2026-10-15
Version History Minor fixes :
MoTeC M800 oil pressure scaling
Water Pressure support for Link ECUs
Fuel level byte offset corrected for Link ECUs 1.58 Sep 5 Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
version 1.58
posted on 2026-09-10
Version History Minor fixes :
MoTeC M800 oil pressure scaling
Water Pressure support for Link ECUs
Fuel level byte offset corrected for Link ECUs 1.58 4d ago Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023
version 1.57 (157)
posted on 2026-09-03
Version History Firmware 0.157 : MoTeC M800 Protocol fixes 1.57 (157) Jun 11 Added support for the new Turbo Speed gauge and expanded R32 compatibility, including R32 Skyline Clock support.
New vehicle management features let you create car profiles, assign multiple devices, and add vehicle photos for easier organization.
Improved multi-device handling, firmware update workflows, and config syncing reliability.
Also includes better support for older devices, improved background image handling, factory config reset support, and other minor fixes. 1.54 (154) Jun 6 Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023 Firmware 0.87: IOS17 Compatibility fix 1.03 (87) 10/01/2023
version 1.50 (150)
posted on 2026-05-28
Version History Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :) 1.50 (150) 10/24/2025 MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID. 1.48 (148) 08/25/2025 Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements. 1.41 (141) 07/07/2025 Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection. 1.38 (138) 05/30/2025 Z32 Fairlady Z appearance
Various firmware updates and bugfixes 1.37 (137) 04/23/2025 Minor bugfixes, firmware version 0.136 1.36 (136) 04/12/2025 IOS App:
Background re-centering in app
Background image delete
Firmware 0.135:
Better night mode hysteresis
Background image delete 1.35 (135) 03/03/2025 *** You must update your device firmware to version 0.133 to use this feature ***
Custom Background Upload -- Click the image icon in the top bar to upload an image from your phone to use as a boot-up splash screen!
Minor bugfixes 1.33 (133) 11/11/2024 Firmware 0.129 :
Minor analog gauge UI bugfix.
Add support for Torque Split gauge on Link Platform.
Add support for Syvecs S7 ECU **Untested** 1.31 (129) 08/12/2024 Bugfixes
App : Putting extended characters in to custom gauge names would prevent further config updates until gauge was power cycled.
Firmware : ECUMaster Black value scaling fixes. 1.30 (126) 07/13/2024 Firmware bugfixes for 2 regressions in fw 0.124 1.29 (125) 06/21/2024 Gauge Control App :
Customizable "backlight" colors
IOS app stability fixes
Firmware:
Link G4 CAN Endianness fix
Link G4x/G4+ gear position fix
Custom Gauge crash when sending uninitialized parameter values. 1.28 (124) 06/20/2024 Bugfixes:
* Cleanups to MoTeC M1 GPR/GPA CAN Stream
* Cleanups to Link G4 CAN Stream
Changes :
Save / Disconnect button behavior changed to be distinct operations.
New features :
* Completely rewritten gauge display code
* "3D" needle sprites for analog gauges
* Two new gauge appearances : 270 degree sweep and CP9A Evo
* 5 user configurable custom digital displays -- up to 7 parameters per gauge, choose from 40 different parameters available over CAN
* MoTeC M1 Powertune Australia Firmware Support
* ECUMaster Black Support 1.25 (121) 04/28/2024 CAN Bus speed configuration
Various bugfixes 1.17 (109) 02/02/2024 AEMNet Support (Infinity ECU)
Legacy Link G4 Support (beta)
Minor bugfixes 1.16 (107) 01/17/2024 New Tribute Mode options!
Various display tweaks 1.10 (102) 12/23/2023 "Tribute Mode" allows users to customize the gauge look to match the vintage performance parts already in their cars. 1.09 (101) 11/28/2023 Firmware 0.100 -- Wideband 02 CANID fix for Haltech Platinum 1.08 (100) 11/27/2023 Firmware 0.96 :
MoTeC M1 General CAN Config fixes 1.07 (96) 11/14/2023 Added separate CAN config for Haltech Platinum ECU
New Firmware (0.94) adds support for Haltech Platinum CAN Protocol 1.06 (94) 11/13/2023 New Gauge faces!
R32 (White)
R33 (Black)
S14 (White)
New font for R33, matches the factory meter more accurately
Removed alternate CAN pin config for Link -- wasn't properly tested, can't actually work with existing hardware.
Minor bugfix -- TPMS warning wasn't working when pressure unit set to kPA 1.05 (93) 11/12/2023 Bugfix : Link ECU ethanol content scaling
Link vehicle speed CAN mapping
R33 Clock-style speedometer
MPH/KPH unit config setting
Various bugfixes
Alternate Link CANID mapping (base CANID 1100) for users running conflicting dashes on base CANID 1000 1.04 (92) 10/24/2023 Firmware 0.87: IOS17 Compatibility fix 1.03 (87) 10/01/2023 Firmware 0.86
* Minor Link ECU bugfixes 1.02 (86) 09/20/2023 Minor bugfixes, customizable CANBUS pin mapping. 1.01 (85) 09/13/2023
version 1.50 (150)
posted on 2025-10-24
Support for upcoming hardware
Fuel level display for Haltech ECUs
Secret Feature unlocks -- long press on the WENDLab logo :)
version 1.48 (148)
posted on 2025-08-25
Aug 25, 2025
Version 1.48 (148)
MaxxECU bugfixes.
Torque split works for Haltech ECUs when transmitting ATESSA pressure on "Tranmission Line Pressure" CANID.
version 1.41 (141)
posted on 2025-07-07
Jul 7, 2025
Version 1.41 (141)
Special GT-R Festival and Motive Video modes.
Z32 Appearance.
Various Bugfixes and enhancements.
version 1.38 (138)
posted on 2025-05-30
May 30, 2025
Version 1.38 (138)
Minor bugfixes.
Changing CAN Mode now resets the device to ensure proper connection.
version 1.37 (137)
posted on 2025-04-23
Apr 23, 2025
Version 1.37 (137)
Z32 Fairlady Z appearance
Various firmware updates and bugfixes
version 1.36 (136)
posted on 2025-04-12
Apr 12, 2025
Version 1.36 (136)
Minor bugfixes, firmware version 0.136
